How to Solve Blue Screen of Death Error In Windows 10 – The Top 5 Solutions

  •   Written By
     
  • Published on
    December 3rd, 2018
  • Updated on
    September 8, 2022
  • Read Time
    5 minutes

The blue screen of death error is one of the common Windows errors that occur on your Computer system. The whole point of this error is to indicate you that your PC has a serious problem till the time it gets fixed, the operating system will not run properly. There can be so many reasons behind this error and you need to fix then all that is causing the blue screen of error.

Is the blue screen of death is a really big issue?
I doubt it. The main focus of such error is to warn you about the problem and to protect your hardware. Whenever the Windows senses that something could cause real harm, it stops everything, resulting in the infamous windows blue screen of death error

Reasons of Blue Death Screen Error in Windows 10

  1. Hardware failure can cause error code in the screen such as “PAGE_FAULT_IN_NONPAGED_AREA”, “MEMORY_MANAGEMENT”, “SYSTEM_THREAD_EXCEPTION_NOT_HANDLED”, etc.
  2. If there’s a bad sector in the hard drive of your PC’s, then your system will not completely load the driver or related files. The data read error will cause system breakdown and the blue screen of death appears in Windows 10.
  3. Power Blackout may cause Windows 10 blue screen. Such as you might receive an error like DRIVER_POWER_STATE_FAILURE.
  4. Blue death screen error can be caused due to missing or corrupted system files. You can find error code 0xc0000225, 0xc000021a, 0xc000000f, 0xc0000001.
  5. The error of death screen appears in Windows 10 can be affected by installing new problematic software that does not suit your system feature.

Fix Blue Screen of Death Error in Windows 10 – Manual Process

Note: Often the blue screen of death can be fixed by attempting to restart the PC.

Please refer to the solutions to fix the blue screen explained below:

#1 Solution: Check For Hardware and Data Cables of the System

If there is something wrong with the data cable or the hardware then please take them out and reset, it is necessary to replace them if they are damaged. If the problem still cannot be fixed, please try Solution 2.

#2 Solution: Safe Mode to Uninstall Problematic Software

A problem can be caused due to a new installation of a software, it is suggested to uninstall the that if it is problematic to you via safe mode.

1: Turn on the PC. Press the power button two times before the manufacturer logo appears. Step 2: When you go into the Windows recovery environment, select “Troubleshoot”.
2: Select “Advanced Options”> “Startup Settings”. Click “Restart”.
3: After restarting the PC, press 4 or F4 to enable safe mode.
4: In safe mode, press “Win” + “I” key to visit theWindows Settings.
5: Select “Apps”. Then uninstall the problematic software.

#3 Solution Startup Repair with Windows Recovery Environment

Perform the startup repair in the Windows recovery environment that can examine the system and fix damaged records and BCD. It means to fix the startup issue including the blue screen of death. Follow the steps to repair the issues:

1: Connect your Windows installation disk to the PC.
2: Now Change the boot order in BIOS Setup and keep the Removable Devices as the first boot choice with which the PC will now boot from Windows installation disk.
3: Click on the option “Repair your computer” from the bottom-left corner after you boot your PC from a USB drive.
4: In Windows recovery environment(WRE), select Troubleshoot> Advanced Options> Startup Repair.

Note: Restart the PC to finish the recovery process.

#4 Solution: Use Scannow to Fix System Files

If some system files are damaged or missing then follow the steps explained below to recover out from the issue.

1: Repeat step 1-3 mentioned in Solution 3.
2: Now In WRE, select Troubleshoot> Advanced Options>Command Prompt.
3: With the command prompt, type in: sfc /scannow. Press “Enter”. Then the system file check will scan and repair the corrupted files.

Note: You must restart your PC after the process finishes.

#5 Solution: Rebuild Missing or Corrupted BCD

This process will help you to rebuild the BCD that is damaged/missing.

Step 1: Repeat step 1/2/3 from the Solution 3.
Step 2: When you enter the recovery environment, select Troubleshoot> Advanced Options> Command Prompt.
Step 3: In the Command Prompt enter code as: bootrec / fixmbr; bootrec / fixboot; bootrec / scanos; bootrec / rebuildbcd, Please press Enter after every command mentioned above.

Note: The above commands will scan Windows system and will rebuild BCD.

Sometimes, while processing manual solutions to solve blue screen error in Windows 10 the user may have to face data loss issues. However, users can restore/recover corrupt, missing and permanently deleted data from any hard drive via SysInfo Hard Drive Data Recovery software. Using this tool, you can easily recover data from both external and internal hard drive. Additionally, it supports formatted disk and corrupt FAT and NTFS file system recovery as well. There are no compatibly issues with the software as it supports all the Windows versions.

 

Conclusion

Blue screen error is the common problem faced by many Windows 10 users. Thus, in the article, I have tried to explain some manual solutions on how to solve blue screen of death error in Windows 10. While sometimes fixing such issues in windows 10, the user might face the data loss/damage issues. Therefore for easily restore that data, you could get help with the automated solution that is Hard Drive Data Recovery software.

Related Post